DEKKORSCAPE EFFLORESCENCE CLEANER
Stronger Cleaning Formula but Gentle to the Pavers
For concrete pavers & natural stones
Dekkorscape Efflorescence Cleaner will remove any efflorescence stains trapped in the concrete pavers, wet cast products & natural stone pores. It will make the surface look more clean and vibrant without discoloring or damaging the surface. This efflorescence cleaning is a necessary step before a sealer is applied. The sealer will be able to get a deeper penetration into the now clean pores.
- Concrete pavers, wet cast and natural stones
- Removes efflorescence from the surface of concrete pavers, wet cast and natural stones
- Cleans pavers prior to sealing
- Removes penetrated dirt
- Restores pavers to their natural color
- No hydrochloric acid in product
- Washes off with water
Ideal Mixture | Approximate Surface cleaned |
---|---|
1 U.S. gal. (3.78 L) diluted with 4 U.S. gal. (15.1 L) of water | 200 sq. ft (18 sq. m.) |
5 U.S. gal. (18.9 L) diluted with 20 U.S. gal. (75.7 L) of water | 1000 sq. ft (93 sq. m.) |
1 U.S. gallon (3.78 L) of diluted product cleans approximately 40 sq. ft (3.7 sq. m.)
PRODUCTS | RETAIL SIZE | PER BOX | PER PALLET |
---|---|---|---|
Dekkorscape Efflorescence Cleaner | 3.78 L. (1 U.S. gal.) | 4 units | 24 boxes |
Dekkorscape Efflorescence Cleaner | 18.9 L. (5 U.S. gal.) | 0 units | 48 pails |
APPLICATION INSTRUCTIONS
PLEASE NOTE
- DEKKORSCAPE EFFLORESCENCE CLEANER should be used prior to applying a sealer to ensure a proper sealer adhesion.
- Freshly installed Dekkorscape Polymeric Sand must be allowed to cure for 48 hours at above 59°F (15°C) and no rain before using DEKKORSCAPE EFFLORESCENCE CLEANER.
- Do not let product dry up on paver surface.
- Wear goggles and rubber gloves.
- Never use on NEW concrete pavers. Wait at least 60 days after new pavers are installed before using this product.
- ALWAYS TEST the product on a small hidden area of approximately 4 sq. ft. (0.4 sq. m.) to ensure the results will meet your expectations. Do not apply under extremely strong sun.
- IDEAL MIXTURE: Dilute to 4 parts water, 1 part DEKKORSCAPE EFFLORESCENCE CLEANER concentrated liquid, any concentration greater than this can discolor the pavers or use a pump sprayer attached to a one gallon, to ensure proper dilution of the DEKKORSCAPE EFFLORESCENCE CLEANER.
STEP 1
STEP 2
Use a pump sprayer or watering can to apply the diluted product on the wet paver surface. Wait one minute for product to react then scrub the surface vigorously using a hard bristle brush. 1 U.S. gal. (3.78 L.) of diluted product is to be used for every 40 sq. ft. (3.7 sq. m.) of paver surface.
STEP 3
STEP 4
STEP 5
Once the surface is clean, use water hose and generously rinse off DEKKORSCAPE EFFLORESCENCE CLEANER until there is no more foaming action on the pavers.