DEKKORSCAPE SHAMPOO

For Concrete Pavers, Wetcast and Natural Stone

APPLICATION INSTRUCTIONS

PLEASE NOTE
  • This product is not an efflorescence cleaner.
  • Do not let product dry up on surface.
  • Wear goggles and rubber gloves.
  • ALWAYS TEST the product on a small hidden area of approximately 4 sq. ft. (0.4 sq. m.) to ensure the results will meet your expectations.
  • IDEAL MIXTURE: 4 parts water – 1 part product of DEKKORSCAPE SHAMPOO concentrated liquid.
  • Use a pump sprayer attached to a one gallon, to ensure proper dilution of the DEKKORSCAPE SHAMPOO.
  • Do not apply under hot sun.
  • Keep paver surface wet from start to finish.
STEP 1

Wet paver surface with water.

STEP 2
  1. Use a pump sprayer or watering can to apply the diluted Dekkorscape Shampoo product on the wet paver surface.
  2. Scrub the surface vigorously using a hard bristle brush. 1 U.S. gal. (3.78 L) of diluted product is to be used for every 75 sq. ft. (7 sq. m.) of paver surface.
STEP 3

Rinse thoroughly with water and move on to the next section of 75 sq. ft. (7 sq.m.).

STEP 4

Repeat steps 2 and 3 over all the sections in question if needed.

 

STEP 5
Once the surface is clean, use a water hose and generously rinse off DEKKORSCAPE SHAMPOO until there is no more foaming action on the pavers.
NOTE

Repeat steps if there is a lot of dirt trapped in the pavers or natural stones.

 

Dekkorscape cannot guarantee results as it has no control over surface preparation and product application. If this product is proven to be defective, on the condition that it was applied pursuant to the required method of application and surface preparation, the sole obligation of Dekkorscape is to refund the purchase price. Proof of purchase is required for any claim. Dekkorscape shall not be liable for any other damages whatsoever, direct or consequential. To the extent permitted by law, Dekkorscape excludes any implied warranty of quality, merchantability or fitness for purpose.